8 Amazing Stereo System Hacks

If there’s one thing that people spend a lot of money on, it’s audio equipment. It seems like nowadays, every household has at least one expensive set of headphones or sound system like encore technology 3cd stereo system with turntable manual. If you’re looking for a few ways to make your stereo system more functional and productive, then these hacks are for you!

Here are 8 amazing stereo system hacks that can make your purchase even worth the cost.

8 wonderful Stereo system hacks are:

1. Use a paperclip as a needle for your record player

If you need to replace the needle of your record player, but don’t have the money to buy a new one, then follow this simple hack. All you need is a small paper clip and bend it into an S shape. This will then act like a replacement for the needle. The down side to this is that it can create some scratches on your records, so be careful when using it.

2. Use a pair of old headphones to create a makeshift headphone jack

If you have an old pair of headphones that you don’t use anymore and need a replacement cable, then this is the hack for you. All you need is the end of the wire that goes into the headphone itself (which should be long enough to reach a socket on your system). Cut off half the wire and strip some insulation off it. This will then give you two wires with which to twist into a cable. Then, solder it onto your stereo system’s motherboard and voila…you now have a new headphone jack!

3. Use a belt to reduce static shock

Static shock is the bane of any stereo system owner. It’s quite common and can be caused by a number of things. Luckily, there are two basic ways to get rid of it. If you’re going for a cheap option, the first thing that you should try is rubbing the cable on any clothing item made of synthetic material (such as polyester). The static generated by rubbing it on your clothes will help eliminate the charge. If that doesn’t work, then you should try wrapping your cable around something that’s grounded (like a metal rod or screw). This will discharge any charge built up in your cable and protect you from static discharge.

4. Use a pair of scissors to clean up your audio cables

Cables are a huge problem for most home stereo systems. They’re not only expensive, but they’re also hard to find and are often very small in size. So how can you improve your system’s quality? The simple solution is to use an old pair of scissors and cut off the end of the cables on any item that has them. This will allow you to make new cable ends from different materials that would suit your system better than the original ones.

5. Use an A/C transformer to convert your AC power outlet into a ground fault interrupter

A ground fault interrupter (GFI) will stop an electrical fire if it occurs. It’s usually fitted to any electrical outlets that have a flat surface in the wall, so that they reach all of the circuitry directly. These are useful when connecting fans or appliances, but most people have them switched off as they have poor diagnostic capabilities and can only detect low voltage problems. But what if you could actually use one for your stereo system? This is where this hack comes in handy!

What you need is a small transformer that can change the voltage up between 110V and 115V. Then all you have to do is attach an old wire from your system’s power cable. If the voltage is less than 115V, then the GFI will kick in, but if it’s higher than 115V, then you will get a low voltage and lights on the device will be illuminated. This can warn you that there is something wrong with your system and can allow you to isolate the components that are malfunctioning.

6. Use a four-way splitter to increase the number of inputs on your receiver

Aftermarket receivers often come without additional inputs (a common feature being only two or three). This can be quite troublesome if your system is large and requires more connections than that. If you need more inputs, then this is the hack for you. All it requires is a four-way splitter and then a pair of RCA plugs to fit into them. This will allow you to add an extra four inputs on your receiver with very little effort.

7. Use an old cassette to store wires and cables

Cables are the bane of any stereo system owner’s life! They’re expensive, they’re hard to find, they’re extremely small in size and they take up so much space. But with this hack, you can solve all of those problems. All you need is an old cassette and then wrap it around the power cables or audio/video wire. This will help eliminate tangled wires and give you a place to store them. If your stereo system has a removable faceplate, then you can use the tape as an adhesive to stick them underneath it.

8. Use a syringe as an electronic contact cleaner

Cleaning electronic contacts is very important if you want to get the best sound quality possible out of your stereo system. A lot of things can cause a reduction in sound quality when using your system, but one of the main causes is corrosion on any of your connections (especially if they’re made of metal).

Conclusion:

There are two types of people in the world: There are those who spend thousands on their stereo system and those who spend nothing. They’re both pretty much right! It all depends on how you want to use your stereo system. Some people just use it for watching movies and listening to music, while others use it for gaming, watching movies and editing software. That’s why it’s so important to have a quality sound setup so that all of your uses will be put to good use.