Master The Art Of Ruger Air Hawk With These 8 Tips

You’re going to be spending a lot of time with your Ruger Air Hawk. Don’t take it for granted! That’s why we’ve compiled these 8 tips and tricks to help you master the art of Ruger Air Hawk usage and ruger air hawk elite 2 problems. Read on if you want expert guidance on how to safely, efficiently, and confidently explore the world with your brand new Ruger Air Hawk.

1) Away from moisture and liquids.

We’ve all heard this before, right? The aluminum tube needs to be away from any moisture or liquids to prevent corrosion. When you’re exchanging air between the gun barrel and the air rifle stock, oil can build up on the breech assembly of your Ruger Air Hawk. Always keep your Ruger Air Hawk away from moisture and liquids of any kind. With proper care it can last a lifetime without rusting or tarnishing like other metals might. Make sure your Ruger Air Hawk is always in a case or bag when not in use.

2) Keep your thumb away from the trigger.

The company that makes your Ruger Air Hawk recommends that you keep your thumb away from the trigger. This is to prevent unwanted firings of the Ruger Air Hawk. After all, it can shoot pretty far and fast! It’s so easy to do, but you have to keep your thumb away from the trigger. It may seem like a silly tip, but people have lost their digits before to this dangerous mistake. It only takes one tiny slip for there to be consequences, so keep it safe!

3) Batteries are like gold!

While it comes with a basic set of batteries for you to get started, you really don’t want to be using those. Batteries are expensive and you’re only going to want the best for your brand new Ruger Air Hawk . Therefore it’s important that you properly care for them and save them when they need to be charged.

4) Don’t throw it in the trash!

That’s right, batteries are expensive, so don’t throw them in with the regular trash! Batteries contain dangerous chemicals that can leak into the ground and other places. You may think your old, worn out batteries are just that, but if you were to plug them in and leave them on the ground, they can get picked up by children. This can be extremely harmful to their health and it’s not worth taking a risk with.

5) Don’t try to put fresh batteries in your Air Hawk.

Always make sure that you are putting the right kinds of batteries in your Ruger Air Hawk. You wouldn’t want to damage your trigger or any other part of your gun, so make sure you read the instructions on what kinds of batteries to use. Just like throwing away dirty batteries, you don’t want to do that either. Batteries have an expiration date and when that expires you’ll be throwing away money and wasting resources. Always try to get new ones or at least test them first before leaving the store.

6) Be careful when unplugging your Air Hawk.

Unplugging your Air Hawk can be very dangerous. In case you’ve ever done it, it’s best to buy a small tool that has a possibility of breaking the battery connector spring wire. Don’t use pliers to pull the battery because chances are the lever will break and cause damage. When you’re done using your Air Hawk for the day, make sure to unplug it from the wall. Never pull out the cord from the Air Hawk or try to yank it out of the wall when you’re done using it. This can loosen up debris in both your Air Hawk and your outlet that could damage your device and hurt you.

7) Go slowly with new batteries.

When you first get your Air Hawk, make sure to test all the batteries that come with it for their power. Industrially made batteries can take up to an hour to fully charge. Ruger Air Hawks come with a charger that has an indicator light on it so you know when they’re fully charged and ready to go. When charging new batteries, don’t use that indicator because it’s not accurate. Check the lights on the charger to check when they’re completely charged.

8) Be careful of your cord.

When you first get your Air Hawk, you want to unpack everything and play around with it as much as possible before closing it back up and putting it away for later. However, this can be tricky because the cord is going to get in the way if you do that. To save yourself from harm, use a tape measure or pen to push the far end of the cord through the eyelets on your Air Hawk so that it won’t get anywhere near anything breakable like glass or metal. That way you don’t have to worry about taking any chances with either of them.

Conclusion:

Keep these tips in mind the next time you pick up your brand new Air Hawk ! We’re sure they’ll keep you safe and save you time. If you have any questions, feel free to ask us anything in the comments below!